hybrid 703 with ssl

Tim Wojtulewicz timwoj at ieee.org
Tue May 3 01:45:32 EDT 2005

I was speaking more along the lines of the problems the original  
poster was having with applying and using the patch.  The current  
patch applies and runs perfectly well against 7.0.3, and I've been  
using it on a 3-server network for many months with no problems.  The  
original poster might want to look at http://madleet.com/projects/ 
703ssl.patch.  The docs for creating the certs are different (read:  
correct) in that version.  I need to email the maintainer of the  
patch archive and have them include the new version.

As for porting it to 7.1, that's a real trick.  I started working on  
that, but never really got a chance to test the changes too much  
since our network runs 7.0.3 and has no current plans to upgrade.  I  
had a preliminary patch at http://madleet.com/projects/71ssl-v2.patch  
if you want to take a look.  I can't recall what version of 7.1 that  
was created against.


On May 2, 2005, at 7:22 PM, Rachel Llorenna wrote:

> Yeah. It might be better if a branch of hybrid was made instead,
> although that would require significant amounts of extra work. Keeping
> patch sets current is a difficult thing to do, which is why so few
> have survived: they end up getting thrown out or merged into the main
> ircd tree. It might be interesting to see client-to-server SSL as an
> option for the main ircd-hybrid tree, but I doubt that's going to
> happen any time in the near future, as it is not currently in use on
> EFnet.
> On 5/2/05, Alan LeVee <alan.levee at prometheus-designs.net> wrote:
>> Well it's more about a matter of time, which I don't have a lot of  
>> right now
>> since I'm relocating to another state. The patch works fine it's  
>> just I have
>> to manually write it in since I can't simply apply it due to the  
>> heavy
>> amount of changes to the source code that was done.
>> -----Original Message-----
>> From: hybrid-bounces at lists.ircd-hybrid.org
>> [mailto:hybrid-bounces at lists.ircd-hybrid.org] On Behalf Of Tim  
>> Wojtulewicz
>> Sent: Monday, May 02, 2005 10:07 PM
>> To: General IRCD-Hybrid Discussion
>> Subject: Re: hybrid 703 with ssl
>> Did you get this resolved?  Sorry it took me so long to speak up,
>> I've been rather busy lately.
>> Tim
>> On Apr 24, 2005, at 4:52 AM, multi multi wrote:
>>> Hi,
>>> I hope i post this in the right section, .. but anyway i have some
>>> problems
>>> with getting ssl working on ircd-hybrid-7.0.3 , i found out during
>>> install
>>> ssl isnt enabled by default, but needed a patch to set the ssl in
>>> the conf etc
>>> i got the patch from this website
>>> http://www.wohmart.com/ircd/pub/hybrid/3-Feature/timwoj-ssl/
>>> 703ssl.patch
>>> its all compiled and working without ssl on a normal port
>>> but as soon i connect to the ssl port, i get connected but
>>> disconnected again
>>> i made the key/pub files and the ssl cert like documentated
>>> but no go, anyway i cant find any log of ssl, only ircd startup is
>>> logged in ircd.log, any other way to check?
>>> i tested this on 2 boxes : at home and another shell, both not  
>>> working
>>> ( gentoo / debian )
>>> so i apparently must do something wrong or oversee something
>>> anyone that can help me out, or got any tips to get it working?
>>> or can tell me which hybrid version i should use with ssl , that
>>> should work?
>>> also i can post the ircd.conf later if needed
>>> Thanks in advance
>>> _________________________________________________________________
>>> MSN Webmessenger overal en altijd beschikbaar http://
>>> webmessenger.msn.com/
>> --
>> No virus found in this incoming message.
>> Checked by AVG Anti-Virus.
>> Version: 7.0.308 / Virus Database: 266.11.1 - Release Date: 5/2/2005
>> --
>> No virus found in this outgoing message.
>> Checked by AVG Anti-Virus.
>> Version: 7.0.308 / Virus Database: 266.11.1 - Release Date: 5/2/2005
> -- 
> Regards,
> Rachel Llorenna (frequency)

More information about the hybrid mailing list